PBM 30 • 50
Profile Bending Machine
PBM 30 • 50
This Profile Bending Machine is specifically designed for circular bending of metal profiles, angles, rings, and tubes. Operate this machine vertically or horizontally. The standard set of bending rolls are suitable for bending square, flat, angle and shaped profiles. Adjust the center drive wheel via a hand crank on the top of the machine. Our rolling machines handle flat bar, square bar, square & rectangular tube, round rod, channels, and T bar using standard tooling which supplied with the machine. Move the two-pedal control to allow for the best placement for your application. These machines are often referred to as pipe benders, profile benders, tube benders, bending rolls, or simply roll benders. If you’re looking for an economical way to create rings, spirals, U’s, and more, the PBM profile bending machine is what you are looking for!
- Motorized drive of the two bottom rolls
- Horizontal and vertical rolling possible
- Millimeter scale for the top roller adjustment (DRO option)
- 2 speed motor
- Bending rolls hardened
Standard configuration
- Modular rolls
- Foot pedal
- Tool kit
- Operation manual
Optional configuration
- Special-design bending rolls
- Spiral bending device
- Digital readout
- Special lateral angle guides
Get a quote or call (610) 441-7317
Click here to see what The Fabricator has to say about our PBMs!
| Specifications | PBM 30 | PBM 50 | |
|---|---|---|---|
| 1” shaft Ø | 2” shaft Ø | ||
| Shaft Ø | mm | 30 (1.1”) | 50 (2”) |
| Upper roll Ø | mm | 148 (5.8”) | 155 (6”) |
| Lower roll Ø | mm | 118 (4.7”) | 155 (6”) |
| Motor power | kW | 0.7/0.85 (1 Hp) | 1.5 (2 Hp) |
| Bending speed | m/min | 3–6 (118–235”/min) | 4.5 (180”/min) |
| Dimensions (L/W/H) | mm | 650x500x1400 (26x20x56”) | 750x900x1355 (30x36x54”) |
| Weight | kg | 220 (480 lbs) | 390 (850 lbs) |
| Item No. | 9301001 | 9301003 | |
*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
| Model | PBM 30 | PBM 50 | |||||
|---|---|---|---|---|---|---|---|
| No | Profile type | Unit | Dimensions | Min. bending diameter | Dimensions | Min. bending diameter | |
| 1 |  |
mm | 30 (1.2”) 10 (0.4”) |
900 (36”) 200 (8”) |
35×35 (1.4×1.4”) 40×10 (1.5×0.4”) |
900 (36”) 300 (12”) |
+ |
| 2 |  |
mm | 50×10 (2×0.4”) 20×6 (0.75×0.25”) |
800 (32”) 300 (12”) |
60×10 (2.4×0.4”) 40×10 (1.5×0.4”) |
500 (20”) 400 (16”) |
+ |
| 3 |  |
mm | 80×15 (3.1×0.6”) 30×6 (1.2×0.25”) |
700 (28”) 400 (16”) |
100×15 (4×0.5”) 60×10 (2.4×0.4”) |
450 (18”) 350 (14”) |
+ |
| 4 |  |
mm | NPU 50 (2”) | 400 (16”) | UPN 80 (3.1”) UPN 60 (2.4”) |
1000 (40”) 700 (28”) |
+ |
| 5 |  |
mm | NPU 50 (2”) | 350 (14”) | UPN 80 (3.1”) UPN 30 (1.2”) |
1200 (48”) 800 (32”) |
+ |
| 6 |  |
mm | 50×6 (2×0.25”) 20×3 (0.75×0.1”) |
600 (24”) 400 (16”) |
60×7 (2.4×0.27”) 50×6 (2×0.25”) |
700 (28”) 500 (20”) |
+ |
| 7 |  |
mm | 50×6 (2×0.25”) 20×3 (0.75×0.1”) |
600 (24”) 400 (16”) |
60×7 (2.4×0.27”) 50×6 (2×0.25”) |
700 (28”) 500 (20”) |
+ |
| 8 |  |
mm | 40×3 (1.5×0.1”) 30×2 (1.2×0.08”) |
1200 (48”) 800 (32”) |
50×3 (2×0.1”) 40×3 (1.5×0.1”) |
1700 (67”) 600 (24”) |
 |
| 9 |  |
mm | 50x30x3 (2×1.2×0.1”) 40x20x2 (1.5×0.7×0.08”) |
1200 (48”) 800 (32”) |
70x30x2 (2.7×1.2×0.08”) 50x40x3 (2×1.5×0.1”) |
1200 (48”) 1200 (48”) |
|
| 10 |  |
mm | Ø30 (1.2”) Ø10 (0.4”) |
900 (36”) 200 (8”) |
Ø35 (1.4”) Ø30 (1.2”) |
600 (24”) 400 (16”) |
|
| 11 |  |
mm | Ø60×1.5 (2.4×0.06”) Ø25×1.5 (1×0.06”) |
1000 (40”) 600 (24”) |
Ø70×2 (2.75×0.08”) Ø30×2 (1.2×0.08”) |
1000 (40”) 500 (20”) |
|
| 12 |  |
mm | 38.1×2.8 (1.5×0.11”) 6.3×1.8 (0.25×0.07”) |
600 (24”) 300 (12”) |
50.8×2.8 (Ø2×0.11”) 25.4×2.3 (Ø1×0.09”) |
1000 (40”) 350 (14”) |
|
| 13 |  |
mm | 40x40x5 (1.5×1.5×0.2”) 30x30x4 (1.2×1.2×0.15”) |
600 (24”) 300 (12”) |
50x50x6 (2x2x0.25”) 30x30x3 (1.2×1.2×0.1”) |
1000 (40”) 500 (20”) |
|
| 14 |  |
mm | 35x35x5 (1.4×1.4×0.2”) 30x30x4 (1.2×1.2×0.15”) |
600 (24”) 400 (16”) |
50x50x5 (2x2x0.2”) 40x40x5 (1.5×1.5×0.2”) |
1000 (40”) 600 (24”) |
|
*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
Material: St. 37. (1) to be re-adjusted subject to distortion. + = Standard bending rolls. = Special-design bending rolls.
In-Stock in Pennsylvania:
| Machine | Specs | Price | Availability |
|---|---|---|---|
| PBM 30 | 1-1/2″ angle Single phase | Immediately | |
| PBM 50 | 2″ Angle Hydraulic DRO | Soon | |
| PBH 50 | 2.4″ Angle Hydraulic DRO | Soon | |
| PBH 65 NC | 2.4″ Angle Hydraulic NC | Soon | |
| PBH 80 | 3.1″ Angle Hydraulic DRO | Soon |
*Stock subject to prior sale. Please call us to confirm: +1 (610) 441-7317
PBM 30 • 50
