HRL 42 • 60
Manual Turret Lathe
HRL 42 • 60
The HRL Manual Turret Lathe are perfectly suited for production. All feeds and travels are manually driven by hand-wheels and the feed length is adjusted by means of exchangeable micrometer stops. The spindle speed is shown on a digital display with two speed ranges with infinite variable adjustment. The pneumatic-driven clamping release of the work piece in the collet chuck ensures speed and accuracy. The pneumatic-driven clamping/release of work piece in the collet chuck ensures less down time changing work pieces. The mechanical bar-stock feeder is fed by counterweight.
Suited for max work pieces up to 1.6″ and 2.3″ (HRL 46 and 60, respectively). Included are a 4-post toolholder, 1-post back tool holder, and 6 position turret. The longitudinal slide feed travel is 3″ and the transverse is 6.1″. The powerful 5.5 Hp motor pushes the spindle 150-1500 rpms. Three collet chuck configurations are available: 30, 42, or 60 mm; with 1 mm increments in round, hex, or rectangular. The turret is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between, such as installing or uninstalling tools, nor to control the toolpath.
Standard configuration
- Cutoff carriage
- 4-post toolholder
- 1-post back toolholder
- 6-position turret
- Coolant system
- Bar feeder
- Collet chuck
- Operation manual
Get a quote or call ((610) 441-7317
Specifications | НRL 42 | НRL 60 | ||||
---|---|---|---|---|---|---|
1.6” round | 2.3” round | |||||
Max. workpiece cross-section | Round | mm | Ø42 (1.6”) | Ø60 (2.3”) | ||
Hexagonal | mm | 36 (1.4”) | 52 (2”) | |||
Rectangular | mm | 29 (1.1”) | 42 (1.7”) | |||
Collet chuck | mm | Ø30/Ø42 (1.1/1.6”) | Ø60 (2.3”) | |||
Turret | 6-pos. | |||||
Turret tool slot Ø | Ø25 (1”) | |||||
Feed travels | Longitudinal slide | mm | 75 (3”) | |||
Transverse slide | mm | 155 (6.1”) | ||||
Turret carriage | mm | 142 (5.6”) | ||||
Cutoff carriage | mm | 35 (1.4”) | ||||
Main drive motor | kW | 4(5.5 Hp) | ||||
Spindle speeds | rpm | 150–1500 | ||||
Pneumatic system pressure | bar | 5–8 (70–115 psi) | ||||
Air flow rate | l | 0.15 per clamping (0.04 gal) | ||||
Coolant supply pump | kW | 0.1 (0.15 Hp) | ||||
Lubrication motor | kW | 0.1 (0.15 Hp) | ||||
Dimensions (L/W/H) | mm | 1600x800x1600 (62x31x62”) | ||||
Weight | kg | 900 (1,980 lbs) | ||||
Item No. | 1700001 | 1700002 |
Collet chuck | Ø30 mm | Ø42 mm | Ø60 mm |
---|---|---|---|
DIN 6343 | Type 163 E | Type 173 E | Type 185 E |
Collet (Ø with 1 mm increment) | Ø3–30 mm (0.11–1.17”) | Ø3–42 mm (0.11–1.6”) | Ø4–60 mm (0.15–2.3”) |
Collet (hex with 1 mm increment) | On request | 6–36 mm (0.23–1.4”) | 8–50 mm (0.31–1.95”) |
Collet (rectangular 1 mm) | On request | 6×6–28×28 mm (.24x.24–1.1×1.1”) | 7×7–40×40 mm (.28x.28–1.6×1.6”) |