HPP 30 • 60 • 100 • 150
Hydraulic C-Frame Press
HPP 30 • 60 • 100 • 150
The Hydraulic C-Frame Press, the HPP, is for compression molding, punching and bending, etc. Tonnage on this machine ranges from 33 up to 165 US tons and 3,300 to 3,540 psi working pressure. The table bore diameter for all models is 3.5″ inside diameter and 3.9″ outside diameter. The table height for these presses is 35.4″.
This Hydraulic C-Frame Press offers both manual and automatic operation. The machines feature a ram plate and work table with T-slots for mounting tooling. The stroke set by a limit switch and lower deep drawing cushions are an available optional. The Siemens PLC control is matched with electrical components from Schneider. This allows spare parts to be found quickly and easily.
Standard configuration
- Siemens PLC control
- Electrical components from Schneider
- SICK safety system
- Sliding, side protective guards
- Two hand working control
- Micro switch – to set the ram travel
- Ram and table top with T-slots
- Pressure gauge
- Operation manual
Optional configuration
- Foot pedal
- Oil/air cooling
- Cushions
- Parts counter
- Automatic lubrication
- Hydraulic overload protection
- Leveling pads
Get a quote or call (610) 441-7317
Click here to see this press in The Fabricator‘s buyers guide!
| Dim | Unit | HPP 30 | HPP 60 | HPP 100 | HPP 150 |
|---|---|---|---|---|---|
| C | mm | 500 (19.7”) | 500 (19.7”) | 800 (31.5”) | 600 (23.6”) |
| D | mm | 400 (15.7”) | 500 (19.7”) | 500 (19.7”) | 1000 (39.4”) |
| F | mm | 900 (35.4”) | 900 (35.4”) | 900 (35.4”) | 900 (35.4”) |
| G | mm | 1100 (43.3”) | 1200 (47.2”) | 1500 (59”) | 1500 (59”) |
| K | mm | 300 (11.8”) | 500 (19.7”) | 600 (23.6”) | 600 (23.6”) |
| M | mm | 180 (7.1”) | 280 (11”) | 330 (13”) | 330 (13”) |
| S | mm | 300 (11.8”) | 500 (19.7”) | 600 (23.6”) | 600 (23.6”) |
| T | mm | 500 (19.7”) | 500 (19.7”) | 800 (31.5”) | 600 (23.6”) |
| Y | mm | 2200 (86.6”) | 2250 (88.6”) | 2500 (98”) | 2700 (106.3”) |
| U | mm | 800 (31.5”) | 1400 (55”) | 800 (31.5”) | 800 (31.5”) |
*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
| Specifications | HPP 30 | HPP 60 | HPP 100 | HPP 150 | |
|---|---|---|---|---|---|
| 33 tons | 66 tons | 110 tons | 165 tons | ||
| Tonnage | t | 30 (33 t) | 60 (66 t) | 100 (110 t) | 150 (165 t) |
| Working pressure | bar | 227 (3,300 psi) | 236 (3,400 psi) | 241 (3,500 psi) | 244 (3,540 psi) |
| Work height | mm | 400 (15.7”) | 500 (19.7”) | 500 (19.7”) | 1000 (39.4”) |
| Table dimensions (W/L) | mm | 500×300 (19.7×11.8”) | 500×500 (19.7×19.7”) | 800×600 (31.5×23.6”) | 600×600 (23.6×23.6”) |
| Cylinder-Ø | mm | 135 (5.3”) | 175 (6.9”) | 230 (9.1”) | 270 (10.6”) |
| Cylinder stroke | mm | 400 (15.7”) | 400 (15.7”) | 500 (19.7”) | 500 (19.7”) |
| Ram plate dimensions | mm | 500×300 (19.7×11.8”) | 500×500 (19.7×19.7”) | 800×600 (31.5×23.6”) | 600×600 (23.6×23.6”) |
| Table bore diameter | mm | inside Ø 90, outside Ø 100 (3.5, 3.9”) | |||
| Working stroke speed | mm/s | 80 (3.1”/s) | 80 (3.1”/s) | 65 (2.6”/s) | 90 (3.5”/s) |
| Return Speed | mm/s | 80 (3.1”/s) | 90 (3.5”/s) | 80 (3.1”/s) | 100 (3.9”/s) |
| Projection | mm | 300 (11.8”) | 350 (13.8”) | 350 (13.8”) | 400 (15.7”) |
| Table height | mm | 900 (35.4”) | 900 (35.4”) | 900 (35.4”) | 900 (35.4”) |
| Hydraulic tank capacity | l | 45 (11.9 gal) | 55 (14.5 gal) | 80 (21.1 gal) | 110 (29 gal) |
| Main drive motor | kW | 4 (5 Hp) | 4 (5 Hp) | 11 (15 Hp) | 21 (30 Hp) |
| Dimensions (L/W/H) | mm | 800x1100x2200 (31.5×43.3×86.6”) |
1400x1200x2250 (55×47.2×88.6”) |
800x1500x2500 (31.5x59x98.4”) |
800x1500x2700 (31.5x59x106.3”) |
| Weight | kg | 1400 (3,080 lbs) | 1900 (4,180 lbs) | 3200 (7,040 lbs) | 7000 (15,400 lbs) |
| Item No. | 9002050 | 9002051 | 9002052 | 9002053 | |
*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
HPP 30 • 60 • 100 • 150
Related Products
HPF
Hydraulic press for bending, punching and compression molding Tonnage: 40–330
HPQ
Hydraulic four-column pressTonnage: 44–220
HPC 63 D • 100 D • 160 D
Hydraulic press with cushion Tonnage: 70–175