HPP 30 • 60 • 100 • 150

Hydraulic C-Frame Press

HPP 30 • 60 • 100 • 150

  • Hydraulic press for compression molding, punching and bending, etc
  • Manual and automatic operation
  • Ram plate and work table with T-slots for mounting tooling
  • Stroke set by limit switch
  • Lower deep drawing cushions optional

Standard configuration

  • Siemens PLC control
  • Electrical components from Schneider
  • SICK safety system
  • Sliding, side protective guards
  • Two hand working control
  • Micro switch – to set the ram travel
  • Ram and table top with T-slots
  • Pressure gauge
  • Operation manual

Optional configuration

  • Foot pedal
  • Oil/air cooling
  • Cushions
  • Parts counter
  • Automatic lubrication
  • Hydraulic overload protection
  • Leveling pads

Get a quote or call (610) 441-7317

DimUnitHPP 30HPP 60HPP 100HPP 150
Cmm500 (19.7”)500 (19.7”)800 (31.5”)600 (23.6”)
Dmm400 (15.7”)500 (19.7”)500 (19.7”)1000 (39.4”)
Fmm900 (35.4”)900 (35.4”)900 (35.4”)900 (35.4”)
Gmm1100 (43.3”)1200 (47.2”)1500 (59”)1500 (59”)
Kmm300 (11.8”)500 (19.7”)600 (23.6”)600 (23.6”)
Mmm180 (7.1”)280 (11”)330 (13”)330 (13”)
Smm300 (11.8”)500 (19.7”)600 (23.6”)600 (23.6”)
Tmm500 (19.7”)500 (19.7”)800 (31.5”)600 (23.6”)
Ymm2200 (86.6”)2250 (88.6”)2500 (98”)2700 (106.3”)
Umm800 (31.5”)1400 (55”)800 (31.5”)800 (31.5”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

SpecificationsHPP 30HPP 60HPP 100HPP 150
33 tons66 tons110 tons165 tons
Tonnaget30 (33 t)60 (66 t)100 (110 t)150 (165 t)
Working pressurebar227 (3,300 psi)236 (3,400 psi)241 (3,500 psi)244 (3,540 psi)
Work heightmm400 (15.7”)500 (19.7”)500 (19.7”)1000 (39.4”)
Table dimensions (W/L)mm500×300 (19.7×11.8”)500×500 (19.7×19.7”)800×600 (31.5×23.6”)600×600 (23.6×23.6”)
Cylinder-Ømm135 (5.3”)175 (6.9”)230 (9.1”)270 (10.6”)
Cylinder strokemm400 (15.7”)400 (15.7”)500 (19.7”)500 (19.7”)
Ram plate dimensionsmm500×300 (19.7×11.8”)500×500 (19.7×19.7”)800×600 (31.5×23.6”)600×600 (23.6×23.6”)
Table bore diametermminside Ø 90, outside Ø 100 (3.5, 3.9”)
Working stroke speedmm/s80 (3.1”/s)80 (3.1”/s)65 (2.6”/s)90 (3.5”/s)
Return Speedmm/s80 (3.1”/s)90 (3.5”/s)80 (3.1”/s)100 (3.9”/s)
Projectionmm300 (11.8”)350 (13.8”)350 (13.8”)400 (15.7”)
Table heightmm900 (35.4”)900 (35.4”)900 (35.4”)900 (35.4”)
Hydraulic tank capacityl45 (11.9 gal)55 (14.5 gal)80 (21.1 gal)110 (29 gal)
Main drive motorkW4 (5 Hp)4 (5 Hp)11 (15 Hp)21 (30 Hp)
Dimensions (L/W/H)mm800x1100x2200
(31.5×43.3×86.6”)
1400x1200x2250
(55×47.2×88.6”)
800x1500x2500
(31.5x59x98.4”)
800x1500x2700
(31.5x59x106.3”)
Weightkg1400 (3,080 lbs)1900 (4,180 lbs)3200 (7,040 lbs)7000 (15,400 lbs)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.


Get a quote

A sales rep will contact you to answer questions and provide a detailed quote.

Or call now: +1 610-441-7317

Your Name (required):

Company (required):

Email Address (required):

Street Address:

City, State, Zip:

Phone Number:

Machine(s) (required):

  • Download PDF FileHPP 30 • 60 • 100 • 150
← PreviousNext →

Related Products

HPF
HPF
Hydraulic press for bending, punching and compression molding
Tonnage: 40–330
HPQ
HPQ
Hydraulic four-column press
Tonnage: 44–220
HPC 63 D • 100 D • 160 D
HPC 63 D • 100 D • 160 D
Hydraulic press with cushion
Tonnage: 70–175
HPC 40 S • 70 S • 100 S • 150 S • 200 S
HPC 40 S • 70 S • 100 S • 150 S • 200 S
C-Frame hydraulic press suited for stamping, die-forming, bending etc.
Tonnage: 40–220