F-Grind AH

 

Surface Grinding MachineF-Grind 3060 AH Surface Grinder

 

F-Grind AH

With a spindle that runs on preloaded precision angular ball bearings and automatic transverse and longitudinal feed, the F-Grind AH series offers unmatched precision and reliability. The table guideways are hardened, ground, and PTFE coated resulting in high wear resistance for years of heavy use. Anyone who surface grinds on the regular knows that a worn table will show in your final product. The polytetrafluoroethylene (PTFE) coating (better known by its trade name Teflon®) is not only handy as nothing will stick to it, but also because it is non-reactive. The non-reactivity is due to the molecules repelling everything, so nothing can get close enough to react. Then there’s the fact that the bond between the fluorine atom and the carbon atom is just really, really strong. The bond is almost bullet proof! It’s so stable that nothing will react with it. Even when it gets as hot as a frying pan, not even oxygen will react with it!

The feed rates of the F-Grind AH series impress even the experienced grinder operator. Longitudinal feed rate is a remarkable 195-975”/min and the rapid cross feed is 35”/min on all models. The rapid vertical feed is 17”/min and the automatic down feed runs between 0.00004” and 0.04”. After running your grinding wheel on the included diamond dresser (most efficient for truing wheels for precision grinding, where accuracy and high finish are required) the available electromagnetic chuck holds your workpiece steady as you set up and run the job.

The coolant system utilizes a pump and tank, allowing a range of coolants to be used according to what is being ground. The 1 Hp hydraulic pump motor runs the table travel efficiently and the main spindle motor (1.5-5.5 Hp) ensures the power you need to reach desired spindle speeds and torque.

The available easy to use AD 5 NC-Control gives operators control of automatic vertical feed of the grinding wheel, automatic cross feed of the table, automatic control of the number of passes and various pre-set grinding cycles.

Table sizes ranging from 6-16” x 18-31” help this automatically lubricated surface grinder fit into any shop needing up to 0.0004” accuracy. From grinding perfect cutting tools, threading tools, punches and gauges to simply smoothing a finished product, the F-Grind AH series does a job that is otherwise almost impossible or at least seriously inconvenient, making any basic machine shop complete. You will most likely need a F-Grind AH surface grinder if you need to provide precision ground surfaces, either for a high surface finish or attaining critical dimensions.

AD 5 NC-control

  • Automatic vertical feed of the grinding spindle
  • Automatic cross feed of the table
  • Automatic control of number of passes
  • Various different grinding cycles

Standard configuration

  • Grinding wheel (standard)
  • Grinding wheel flange (standard)
  • Balancing arbor
  • Balancing stand
  • Diamond dresser
  • Work light
  • Coolant system
  • Leveling pads and bolts
  • Tool kit
  • Operation manual

Optional configuration

  • AD 5 NC control
  • Magnetic chuck
  • Coolant system with paper filter and magnetic separator
  • Automatic demagnetizing
  • Extra grinding wheel
  • Backsplash guard
  • Parallel dresser (manual)
  • NC-controlled dressing and compensating device
  • Micro-fine cross feed
  • Micro-fine vertical feed
  • Vertical rapid feed

Get a quote or call (610) 441-7317

Specifications F-Grind
1545 AH 2045 AH 2550 AH 3060 AH 4080 AH
6” x 18” 8” x 18” 10” x 20” 12” x 23” 16” x 31”
Table dimensions (W/L) mm 150×450 (5.8×17.5”) 200×450 (8×17.5”) 250×500 (9.75×19.5”) 300×600 (11.5×23”) 400×800 (15.5×31”)
Max. workpiece dimensions mm 150×450 (5.8×17.5”) 200×450 (8×17.5”) 250×500 (9.75×19.5”) 340×700 (13×27”) 450×860 (17.5×33.5”)
Distance spindle center-table mm 450 (17.5”) 450 (17.5”) 500 (19.5”) 500 [opt. 600] (19.5” [opt. 23”]) 550 [opt. 650] (21.6” [opt. 25”])
Longitudinal feed rate m/min 5–25 (195–975”/min)
Automatic transverse feed increment mm 0.1–12 (0.004–0.5”) 0.1–20 (0.004–0.8”)
Rapid cross feed mm/min 900 (35”/min)
Transverse feed increment mm 0.02 (0.0008”)
Transverse feed per revolution mm 5 (0.2”)
Vertical feed increment mm 0.01 [opt. 0.005] with AD5 (0.0004” [opt. 0.0002”])
Vertical feed per revolution mm 2 (0.08”)
Rapid vertical feed mm/min 450 (17”/min)
Automatic down feed mm 0.001–0.999 (0.00004–0.04”)
Spindle speed rpm 2900 1450
Grinding wheel dimensions OD/bore/width (standard) mm Ø180x13xØ31.75 (7×0.5×1.25”) Ø180x13xØ31.75 (7×0.5×1.25”) Ø180x13xØ31.75 (7×0.5×1.25”) Ø355x38xØ127 (14×1.5×5”) 406x50xØ127
(16x2x5”)
Main spindle motor kW 1.5 (2 Hp) 3.75 (5 Hp) 3.75 [opt. 5.5] (5 Hp [opt. 7.5 Hp])
Hydraulic pump motor kW 0.75 (1 Hp) 0.75 (1 Hp) 1.5 (1 Hp)
Dimensions (L/W/H) mm 2120x1460x1950 (83x57x76”) 2120x1460x1950 (83x57x76”) 2120x1460x2000 (83x57x78”) 2280x1790x2100 (89x70x82”) 2760x2280x2150 (108x89x84”)
Weight kg 900 (1,980 lbs) 950 (2,090 lbs) 1350 (2,970 lbs) 1700 (3,740 lbs) 3250 (7,150 lbs)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
** AD 5 NC only


Get a quote

A sales rep will contact you to answer questions and provide a detailed quote.

Or call now: +1 610-441-7317

Your Name (required):

Company (required):

Email Address (required):

Street Address:

City, State, Zip:

Phone Number:

Machine(s) (required):

In-Stock in Pennsylvania:

Machine Specs Price Availability
F-Grind 2550 AH 10″x20″, AD5 NC Control,
Electromagnetic Chuck, Coolant
Immediately
F-Grind 4080 AH 17″x33″, AD5 NC Control,
Electromagnetic Chuck, Coolant
Immediately

*Stock subject to prior sale. Please call us to confirm: +1 (224) 216-8886



Get a quote

A sales rep will contact you to answer questions and provide a detailed quote.

Or call now: +1 610-441-7317

Your Name (required):

Company (required):

Email Address (required):

Street Address:

City, State, Zip:

Phone Number:

Machine(s) (required):

  • Download PDF FileF-Grind AH
← PreviousNext →

Related Products

F-Grind AH
F-Grind AH
Surface-grinding machine
6x18”—16x31”
F-Grind A
F-Grind A
Heavy-duty surface grinder
20x40”—27x80”
F-Grind V
F-Grind V
Heavy-duty surface grinder
31x58”—39x117”