F-Grind Advance

(NC) Surface Grinding Machine

F-Grind Advance

High quality NC-controlled surface grinding machine with automatic dressing

Surface

The precision-ground guideways, coated with TURCITE B, have a low-friction surface. Stick-slip is reduced drastically between the two precision surfaces. Furthermore, the surfaces allow for very quiet motion and are highly resistant against wear.

Lubrication

The spindles have special sealed bearings and are lubricated for the service life, that ensuring minimal servicing. The guideways are automatically supplied with oil straight after activation of the hydraulic system. Lack of oil is thus never a problem. In addition, an automatic alarm system warns the operator in case of a low oil level.

Basic machine parts annealed for stress relief

The frame, the table, the support, the column, and all other main machine castings are quenched and tempered twice. This minimizes all metallurgical stresses.

  • Heavy gray cast iron frame optimized by FEA analysis
  • X and Z axes are laminated with Turcite B
  • Precision cartridge spindle with high rigidity
  • Precision grinding spindle with class P4 bearing ensures quiet and vibration-free spindle travel of 2 μm
  • X axis feed controlled by steplessly adjustable proportional valve
  • Y and Z axes driven by digital AC servo motors
  • Partial housing for reduction of spray
  • Manual axis feed joystick option
  • Steplessly controllable spindle speed through inverter technology
  • Automatic dressing unit with integrated compensation for a significant increase in productivity
  • Accuracy according to DIN 8632
  • Including automatic grinding cycles (flat, cross, groove, spark-out, dressing)
  • The current axis position can be read at any time off the clear 8” touchscreen display
  • Optional automatic balancing device available to reduce downtime
  • Optional parallel dressing unit with automatic compensation

Standard configuration

  • NC control
  • LCD touch screen
  • Automatic down feed, AD-5
  • Auto crossing stroke adjustment
  • Criss cross grinding cycle
  • Automatic dressing unit including automatic compensation
  • Electrical handwheel (MPG)
  • Stepless adjustable grinding spindle speed
  • Partial guarding
  • Balancing stand
  • Balancing arbor
  • Work light
  • Coolant system with paper filter
  • Leveling pads
  • Tool kit
  • Operation manual
  • Grinding wheel flange (standard)

Optional configuration

  • Magnetic chuck
  • Coolant system with paper filter and magnetic separator
  • Automatic demagnetizing
  • Extra grinding wheel
  • Complete housing

Get a quote or call (610) 441-7317

Specifications2045255030604080501006010070100
8” x 17”10” x 19”11” x 23”15” x 31”19” x 39”23” x 39”27” x 39”
Table dimensions (W/L)mm200×450 (7.8×17”)250×500 (9.8×19”)300×600 (11×23”)400×800 (15×31”)500×1000 (19×39”)600×1000 (23×39”)700×1000 (27×39”)
Distance spindle center-tablemm500 (19”)500 (19”)500 (19”)600 (23”)
Rapid traversem/min5–25 (197–984”/min)5–25 (197–984”/min)5–25 (197–984”/min)
Rapid Z-axismm/min900 (35”)900 (35”)900 (35”)
Feedmm/min450 (17”)450 (17”)300 (11”)
Feed motorW750 (AC servomotor)750 (AC servomotor)1.5 K (AC servomotor)
Z-axis motorW1K (AC servomotor)1K (AC servomotor)1K (AC servomotor)
Vertical feed: 1 scale divisionmm(x1) 0.1, (x) 0.5, (x10) 1(x1) 0.1, (x) 0.5, (x10) 1(x1) 0.1, (x) 0.5, (x10) 1
Vertical feed: 1 revolutionmm(x1) 0.001, (x) 0.005, (x10) 0.01(x1) 0.001, (x) 0.005, (x10) 0.01(x1) 0.001 , (5x) 0.005, (x10) 0.01
Grinding wheel dimensionsmm180x13x31.75 (7×0.5×1.2”)355x38x127 (13×1.4×5”)405x50x127 (15×1.9×5”)405x50x127 (15×1.9×5”)
Spindle speedrpm290014501450
Spindle motor powerkW1.4 (1.8 Hp)3.67 (4.9 Hp)7.35 (9.8 Hp)
Hydraulic motor powerkW0.75 (1 Hp)1.4 (0.5 Hp)3.67 (4.9 Hp)
Weightkg1950 (4,290 lbs)2000 (4,400 lbs)2500 (5,500 lbs)3700 (8,140 lbs)6870 (15,114 lbs)7170 (15,774 lbs)7470 (16,434 lbs)
Dimension (L/W/H)mm2680x2350x2000 (105x92x78”)2680x2350x2000 (105x92x78”)3000x2350x2460 (118x92x96”)3300x2650x2540 (129x104x100”)4800x2500x2040 (188x98x80”)4800x2600x2040 (188x102x80”)4800x2700x2040 (188x106x80”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Specifications501506015070150502006020070200
19” x 59”23” x 59”27” x 59”19” x 78”23” x 78”27” x 78”
Table dimensions (W/L)mm500×1500 (19×59”)600×1500 (23×59”)700×1500 (27×59”)500×2000 (19×78”)600×2000 (23×78”)700×2000 (27×78”)
Distance spindle center-tablemm600 (23”)600 (23”)
Rapid traversem/min5–255–25
Rapid Z-axismm/min900 (35”)900 (35”)
Feedmm/min300 (11”)300 (11”)
Feed motorW1.5K (AC servomotor)1.5K (AC servomotor)
Z-axis motorW1K (AC servomotor)1K (AC servomotor)
Vertical feed: 1 scale divisionmm(x1) 0.1, (5x) 0.5, (x10) 1(x1) 0.1, (5x) 0.5, (x10) 1
Vertical feed: 1 revolutionmm(x1) 0.001, (5x) 0.005, (x10) 0.01(x1) 0.001, (5x) 0.005, (x10) 0.01
Grinding wheel dimensionsmm405x50x127 (17×1.9×5”)405x50x127 (17×1.9×5”)
Spindle speedrpm14501450
Spindle motor powerkW7.35 (9.8 Hp)7.35 (9.8 Hp)
Hydraulic motor powerkW3.67 (4.9 Hp)3.67 (4.9 Hp)
Weightkg7870 (17,314 lbs)8170 (17,974 lbs)8470 (18,634 lbs)9070 (19,954 lbs)9370 (20,614 lbs)9670 (21,274 lbs)
Dimension (L/W/H)mm5000x2500x2040 (196x98x80”)5000x2600x2040 (196x102x80”)5000x2700x2040 (196x106x80”)6200x2500x2040 (244x98x80”)6200x2600x2040 (244x102x80”)6200x2700x2040 (244x106x80”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.


Get a quote

A sales rep will contact you to answer questions and provide a detailed quote.

Or call now: +1 610-441-7317

Your Name (required):

Company (required):

Email Address (required):

Street Address:

City, State, Zip:

Phone Number:

Machine(s) (required):

  • Download PDF FileF-Grind Advance
← Previous

Related Products

F-Grind AH
F-Grind AH
Surface-grinding machine
6x18”—16x31”
F-Grind A
F-Grind A
Heavy-duty surface grinder
20x40”—27x80”
F-Grind V
F-Grind V
Heavy-duty surface grinder
31x58”—39x117”