CNC Vertical Drill/Tap Center

TCR 500 CNCCNC Vertical Drill/Tap Center

Compact high speed drilling and milling center with speeds of 48 m/min (1890”/min) (X/Y-axis) and 60 m/min (2360”/min) (Z-axis)

This CNC Vertical Drill/Tap Center is a real all-rounder with a compact and solid cast construction design in combination with high acceleration and ease of application. This machine is ideal for drilling, tapping and light to medium milling work. High precision is supplemented through the use of roller bearings in the linear guides ensuring smooth running and stability even at high speeds. Short tool change time of 1.6 seconds, and high axis accelerations of up to 1.5 G are the basis for efficient volume production. The spindle blow out device during tool change contributes significantly to the process safety.

This CNC Vertical Drill/Tap Center is run with a Mitsubishi M70 CNC control and an independent drive motor for each axis (X, Y Z; 2 Hp, 2Hp, and 4 Hp respectively). The cutting feed rate is 39-472″/minute. The speed is 12,000 rpms. This machine holds 14 tools up to 3″ diameter, 8″ long, and 3 pounds for a combined total of up to 55 lbs. The T-T tool change time is 1.6 seconds and the tool change time C-C is 2.5 seconds.

Standard configuration

  • Mitsubishi M70 control
  • BT30 spindle, 12,000 rpm
  • Spindle air gun
  • ATC 14 tools
  • Rigid Tapping
  • Chip conveyor
  • Spindle oil cooling
  • Automatic lubrication
  • Three-color warning light
  • Leveling pads
  • Work light

Optional configuration

  • 4th axis
  • Faster spindle motor, 15,000 rpm
  • Tool and workpiece measurement

Get a quote or call (610) 441-7317

Specifications TCR 2500 CNC
20” X-travel
CNC control Mitsubishi M70
Table dimensions (W/L) mm 650×400 (26×16”)
Max. table load kg 300 (660 lbs)
T-slots mm 3x14x125 (0.1×0.5×5”)
Axis travel X mm 510 (20”)
Y mm 406 (16”)
Z mm 330 (13”)
Rapid traverse – X/Y/Z axis m/min 48/48/60 (1890/1890/2360”)
Cutting feed rate m/min 1–12 (39–472”/min)
Speed rpm 12,000
Taper BT 30
Spindle-table distance mm 170–500 (7–20”)
Spindle-column distance mm 460 (18”)
Number of tools # 14 (servo)
Max. tool diameter mm Ø80 (Ø3”)
Max. tool length mm 200 (8”)
Max. tool weight (full) kg 25 (55 lbs)
Max. tool weight (single) kg 3 (7 lbs)
Tool change time (T-T) sec 1.6
Tool change time (C-C) sec 2.5
Main spindle motor kW 2.2/3.7 (3/5 Hp)
Main drive motor X kW 1.5 (2 Hp)
Y kW 1.5 (2 Hp)
Z kW 3 (4 Hp)
Dimensions (L/W/H) mm 1600x2150x2320
Weight kg 2600 (5,730 lbs)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

    Get a quote

    A sales rep will contact you to answer questions and provide a detailed quote.

    Or call now: +1 610-441-7317

    Your Name (required):

    Company (required):

    Email Address (required):

    Street Address:

    City, State, Zip:

    Phone Number:

    Machine(s) (required):

    • Download PDF FileTCR 500 CNC
    Next →

    Related Products

    TCR 510 • 510B
    TCR 510 • 510B
    Tapping Center
    20” X-travel