Manual Large Lathes

Loading Images
wpif2_loading
d-turn
d-turn-face-side
d-turn-hd-480-3000

Manual Heavy-Duty Lathe

For extra-large workpieces with extremely heavy weight or long length, the D-Turn Giant and D-Turn Face lathes are built with heavy FC-30 cast machine beds featuring strong ribbing to minimize vibrations. These monster manual lathes have the X and Z axis coated with Turcite B to minimize friction and extend machine lifetime.

D-Turn Giant ● 63” to 91” swing and up to 394” center to center
D-Turn Face ● 60” to 100” swing and up to 40” center to center
D-Turn HD ● 37” or 43.5 and up to 312″ center to center

Standard Configuration

  • 3-axis digital readout
  • Longitudinal & cross rapid feed
  • Work light
  • Coolant system
  • Automatic lubrication
  • Tailstock with 2 feed speeds
  • Reduction sleeves
  • Center
  • Leveling pads
  • Spindle motor: 30HP
  • Electromagnetic spindle brake
  • Metric/Inch gearbox
  • XZ-axes with Turcite-B
  • Faceplate with 4 jaws
  • Tool kit
  • Operation manual

Optional Configuration

  • Faster spindle
  • 3-jaw chuck (various sizes)
  • 4-jaw chuck (various sizes)
  • Follow or steady rest (various sizes)
  • Spindle bore, Ø410 mm (16”)
  • Taper attachment
  • Hydraulic copying attachment
  • Quick-change toolholder
  • Grinding attachment
  • Rear toolholder
  • Tailstock
  • Face plate with 4-jaw 70”
  • Spindle nose: A2-20
D-Turn Giant ● 63” to 91” swing and up to 394” center to center
D-Turn Face ● 60” to 100” swing and up to 40” center to center
D-Turn HD ● 37” or 43.5 and up to 312″ center to center
Specifications1600
5′ swing
1800
6′ swing
2000
6’” swing
2300
7” swing
CAPACITYDistance between centersmm2000, 3000, 4000, 5000, 6000, 8000, 9000, 10000
(79, 118, 157, 197, 236, 315, 354, 394″)
Center heightmm800 (31.5”)900 (35”)1000 (39”)1150 (45”)
Swing over bedmmØ1600 (63”)Ø1800 (71”)Ø2000 (79”)Ø2300 (91”)
Swing over carriagemmØ1230 (48”)Ø1430 (56”)Ø1630 (64”)Ø1700 (67”)
BED
Swing over gapmmØ1950×750
(77×29.5”)
Ø2100×750
(83×29.5”)
Ø2300×750
(91×30”)
Width of bedmm888 (35”)1150 (45”)
HEADSTOCKMain spindle motorkW37 (50 Hp)43 (60 Hp)
Spindle boremmØ230 [opt. Ø310, Ø360, Ø410]
(90” [opt. 12, 14, 16”])
Ø165 [opt. Ø230, Ø310, Ø410]
(6” [opt. 12, 14, 16”])
Spindle taperA2-11, A2-15,
A2-20 or A2-28
Speedsrpm5-400(12) 4-400
TAILSTOCK
Tailstock quill diametermmØ220 [opt. Ø295]
(8.6” [opt. 11.6”])
Tailstock taperMT 7
Tailstock quill travelmm400 (15.7”)
FEEDS
Axis feedХ mm/rev0.0102–0.5735
(0.004–0.002”/rev)
Z mm/rev0.0100–1.4145
(0.004–0.05”/rev)
TRAVELS
Axis travel
Х mm1000 (39”)1250 (49″)
Z1 – overslide mm350 mm
(13.8″)
400 mm
(16″)
MISC
Tool shank dimensionsmm50х50 (2×2”)
Threadingmetric mm(35) 1–59
(0.04–2.3”)
(35)1–56
(0.04–2.2”)
inches TPI(34) 0.8–18(34) 0.8–28
Rapid traverse motor
kW0.37 (1 Hp)

Get A Quote

Get pricing and availability

Call us Monday-Friday 8:30am-5pm EST at 1-610-441-7317 or request info here:

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Products
Inventory
Get A Quote
Contact
Trade Shows

(610) 441-7317

Twitter
Facebook
Google
Linkedin
YouTube