BAND SAWS

Loading Images
wpif2_loading
HBS A 540 G Fully Automatic Dual Column Mitering Band Saw
hbs-1100-c
hbs-230-dg
hbs-320-gl
hbs-320-l
hbs-325-c
hbs-a-360-g
hbs-a-560-c
Fully automatic bandsaws allow the operator to program a certain number of cuts, and walk away.

Available from 9”-22” capacity, our fully automatic band saws are workhorses that churn out parts faster than an operator ever could. The operator loads the material, sets the length, and enters the number of cuts. The saw will continuously cut and automatically feed the material until it reaches the number of cuts programmed or runs out of material. These machines saw through bar stock, tubes, steel profiles and cast-iron materials with ease.

Scissor Type band saws pivot the saw head on a bearing on one side of the head. These band saws feature a rigid and compact design, automatic material feed, a parts counter, and a built-in flood coolant system. They allow the operator to control band speed and cutting force, resulting in premium cutting results and extending blade life. The automatic feed will help reduce scrap, labor costs, and errors, while the simple design and brand-name components will ensure easy service and reduced down-time. Dual column band saws raise and lower the head on precision ground linear guides. The frame of this fully automatic bandsaw’s solid cast mono-block construction keeps vibrations to a minimum and results in straight, accurate cuts and extended blade life. The blade guides and rollers are carbide which promotes longevity. Hydro-mechanical blade tension and an automatic band breakage detection and shut-off feature make this automatic band saw truly great.


Swivel head mitering band saws allow the entire blade and housing to be rotated to set and cut the desired angle.

The fully automatic swivel-head mitering band saws offered by KAAST feature an NC control with digital display of the angle as well as the ability to program multiple cuts for multiple lengths at the same angle.

Check our Inventory page for a full list of machines available with no wait time!

Standard Configuration

  • Solid cast mono-block frame
  • Automatic adjustable saw head lift by hydraulic cylinder
  • Material feed and clamping is carried out by driven rollers (worm gears)
  • Material length set by manually movable stop with micro-switch
  • Desired number of parts controlled by part counter
  • Infinitely variable band speed 20-100 m/min (65.5-328'/min)
  • Infinitely variable pressure regulation by hydraulic cylinders
  • Carbide blade guides and rollers
  • Automatic blade breakage detection
  • Hydromechanical blade tension
  • Flood coolant system
  • Hydraulic vise
  • Hydraulic shuttle vise (Swivel Head Mitering Band Saws)
  • Roller conveyor 1200 mm (47")
  • Bimetallic bandsaw blade
  • Operation manual
  • Linear guide ways (Dual Column Band Saws)

Optional Configuration

  • Hydraulic top clamp
  • Hydraulic blade tension
  • Chip removal conveyor
  • Cut-line illumination by laser pointer
  • Mist coolant system
  • Feed roller conveyor 3000 mm (118")
  • Motor driven feed roller conveyor 3000 mm (118")
  • Bimetallic bandsaw blade (different tooth pitches)

FeaturesModelsCapacityTypeAvailability
Semi-automatic
Double miter
HBS 230 DG9″ CapacityScissor TypeImmediately
HBS 270 DG10.5″ CapacityScissor TypeImmediately
HBS 360 DGH14″ CapacityScissor TypeImmediately
HBS 440 DG17″ CapacityDual ColumnImmediately
Semi-automatic
Single miter
HBS 320 G12.5″ CapacityScissor TypeImmediately
Semi-automatic
HBS 320L13″ CapacityScissor TypeSoon
HBS 32012.5″ CapacityScissor TypeImmediately
HBS 325 C13″ CapacityDual ColumnSoon
HBS 380 C15″ CapacityDual ColumnSoon
HBS 460 C18″ CapacityDual ColumnImmediately
HBS 560 C22″ CapacityDual ColumnImmediately
HBS 810 C32″ CapacityDual ColumnImmediately
Fully-automatic
Single miter
HBS A 325 G13″ CapacityDual ColumnImmediately
Fully-automaticHBS A 2309″ CapacityScissor TypeImmediately
HBS A 32012.5″ CapacityScissor TypeImmediately
HBS A 380 C15″ CapacityDual ColumnImmediately
HBS A 460 C18″ CapacityDual ColumnImmediately
Semi-automatic band saws will lower and raise the head automatically, but material feed is manual

Available in 9”- 60” capacity, our HBS semi-automatic band saws feature solid cast monoblock construction keeping vibrations to a minimum and resulting in straight accurate cuts and long blade life. These saws combine infinitely variable band speed and cutting force with a built-in coolant system for optimum metal cutting results. The blade guides and rollers are carbide which promotes longevity. Hydro-mechanical blade tension and an automatic band breakage detection and shut-off feature complete these machines. The semi-automatic operation of these horizontal band saws will speed production, while the simple design and brand-name components will ensure easy service and reduced down-time.All semi-automatic saws from KAAST make miter cuts using either a swiveling head or a swiveling vice. Semi-automatic saws are a good fit if you need to make a few cuts in a length of material or need to cut many different angles.

The head movement of our semi-automatic saws is controlled by a hydraulic piston and can be raised and lowered by the operator activating the up/down switch. The saw will make a cut, then lift the head back to the upper position.

Semi-automatic scissor type band saws pivot the saw head on a bearing on one side of the head. The quick action vice will help reduce scrap, labor costs, and errors, while the simple design and brand-name components will ensure easy service and reduced down-time.

Semi-automatic dual column band saws raise and lower the head on precision ground linear guides which keep vibrations to a minimum and results in straight, accurate cuts and extended blade life. Dual column saw blades also take the shortest route through the material, decreasing the time required per cut and increasing production numbers.

Semi-automatic swivel-head mitering saws are available in both scissor and dual column designs.
While the scissor type allows for mitering between 90° and -45°, their dual column counterparts allow cuts to be made at up to +60°.

Both offer simple angle adjustment, and the dual column saws also feature a digital read out of the cut angle and a rolling control panel.

Check our Inventory page for a full list of machines available with no wait time!

Standard Configuration

  • Infinitely variable band speed 20-100 m/min (65.5-328’/min) (2 speeds for HBS 230 DG)
  • Infinitely variable pressure regulation by hydraulic cylinders
  • Quick action vice (Hydraulic on dual column saws)
  • Roller conveyor 1200 mm (47”) (except HBS 230 DG)
  • Bimetallic bandsaw blade
  • Operation manual

Optional Configuration

  • Hydraulic top clamp
  • Hydraulic blade tension
  • Chip removal conveyor
  • Cut-line illumination by laser pointer
  • Mist coolant system
  • Feed roller conveyor 3000 mm (118”)
  • Motor driven feed roller conveyor 3000 mm (118”)
  • Bimetallic bandsaw blade (different tooth pitches)

FeaturesModelsCapacityTypeAvailability
Semi-automatic
Double miter
HBS 230 DG9″ CapacityScissor TypeImmediately
HBS 270 DG10.5″ CapacityScissor TypeImmediately
HBS 360 DGH14″ CapacityScissor TypeImmediately
HBS 440 DG17″ CapacityDual ColumnImmediately
Semi-automatic
Single miter
HBS 320 G12.5″ CapacityScissor TypeImmediately
Semi-automatic
HBS 320L13″ CapacityScissor TypeSoon
HBS 32012.5″ CapacityScissor TypeImmediately
HBS 325 C13″ CapacityDual ColumnSoon
HBS 380 C15″ CapacityDual ColumnSoon
HBS 460 C18″ CapacityDual ColumnImmediately
HBS 560 C22″ CapacityDual ColumnImmediately
HBS 810 C32″ CapacityDual ColumnImmediately
Fully-automatic
Single miter
HBS A 325 G13″ CapacityDual ColumnImmediately
Fully-automaticHBS A 2309″ CapacityScissor TypeImmediately
HBS A 32012.5″ CapacityScissor TypeImmediately
HBS A 380 C15″ CapacityDual ColumnImmediately
HBS A 460 C18″ CapacityDual ColumnImmediately

STYLIST

Upper Limit Switch

Fully Automatic Band Saw Upper Limit

The upper limit switch reduces cut time by limiting the opening-height of the saw head.

STYLIST

Chip Conveyor

Chain Type Band Saw Chip Conveyor

The optional chip conveyor assists with moving heavier quantities of chips.

STYLIST

HBS A 230

DK Customs review of our HBS A 230 premier automatic band saw.

STYLIST

Blade Brush

Band Saw Blade Brush

The blade brush ensures a clean cut & long blade life by removing the chips from the blade.

STYLIST

Control Panel

Fully Automatic Band Saw Control

The easy to understand control panel features a programmable cut counter.

STYLIST

Saw Blade Tension

Dual Column Band Saw Blade Tension

The hydro-mechanical blade tension features auto blade-breakage detection.

Get A Quote

Get pricing and availability

Call us Monday-Friday 8:30am-5pm EST at 1-610-441-7317 or request info here:

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Products
Inventory
Get A Quote
Contact
Trade Shows

KAAST Machine Tools, Inc.

3 Merion Terrace
Aldan, PA 19018 USA

(610) 441-7317

Twitter
Facebook
Instagram
Linkedin
YouTube