RD 50 • 60 • 70 • 100

Radial Drilling Machine

RD 50 • 60 • 70 • 100

S • M • L

  • The Radial Drill Arm includes an IC Timer with one button press. Operation is simple, as it automatically moves up, down, stops and clamps. The spindle retains original position after the tools are changed.
  • The oil pump is furnished exclusively for cycling gear types, to cool off precise gears inside the gear box and prevent excessive wear.
  • Friction type disc clutch absorbs all impact force caused by vertical movement of the spindle, and effectively protects all transmission units inside the gear box. Quick spindle return speeds up the tapping operation.
  • A special arm-elevating safety device prevents the arm from falling abruptly after many years of use. This avoids potential injuries when the copper nut is excessively worn.
  • The gear box uses high-speed precision gears which are mechanically shifted for easy manipulation. This model is highly efficient, with sufficient horsepower and a low level of noise.

Standard configuration

  • Tool kit
  • Cooling device (pump included)
  • Work light
  • Box-type work table

Optional configuration

  • Uni-tilt table tilts full 90 degrees
  • Calibrated indicator shows that the degree of tilt has accurately planed the top

Get a quote or call (224) 216-8886

Specifications RD 50 S RD 50 L RD 60 M RD 60 L
2” capacity, small 2” capacity, large 2.4” capacity, medium 2.4” capacity, large
Capacity Drilling Steel mm Ø 32 (1.3”) Ø 50 (2”)
Cast iron mm Ø 50 (2”) Ø 60 (2.4”)
Tapping Steel mm Ø 25 (1”) Ø 40 (1.6”)
Cast iron mm Ø 32 (1.3”) Ø 50 (2”)
Column diameter mm 210 (8.3”) 300 (11.8”) 320 (12.6”)
Max spindle-column distance mm 750 (29.5”) 950 (37.4”) 1250 (49.2”) 1600 (63”)
Min spindle-column distance mm 220 (8.7”) 360 (14.2”) 350 (13.8”)
Spindle head travel mm 530 (20.9”) 730 (28.7”) 890 (35”) 1250 (49.2”)
Max base-spindle end distance mm 1060 (41.7”) 1210 (47.6”) 1345 (53”) 1420 (56”)
Min base-spindle end distance mm 260 (10.2”) 350 (13.8”) 441 (17.4”) 465 (18.3”)
Elevating height of arm mm 580 (22.8”) 640 (25.2”) 630 (25”) 680 (26.5”)
Box table dimensions mm 600x445x380 (24x18x15”) 635x520x420 (25x20x17”) 630x500x500 (24×20×20”)
Dimensions of base mm 1260x640x160 (50x25x6”) 1785x785x190 (70x31x7”) 2550x970x200 (100×38×8”)
Spindle taper MT#4 MT#5
Stroke of spindle mm 220 (8.7”) 270 (10.6”)
Speeds rpm 88–1500 56–1450
Feed of spindle rev 0.05–0.15 0.06–0.20
Main drive motor kW 1.5 (2 Hp) 3.7 (5 Hp) (2-speed)
Elevating motor kW 0.7 (1 Hp) 0.7 (1 Hp) 1.5 (2 Hp)
Clamping motor kW 0.7 (1 Hp)
Coolant equipment kW 0.09 (.125 Hp) 0.09 (.125 Hp)
Overall height mm 2170 (85”) 2320 (91”) 2645 (104”) 2760 (109”)
Base + column height mm 1850 (73”) 2010 (79”) 2080 (82”) 2186 (86”)
Weight kg 1120 (2,470 lbs) 1250 (2,760 lbs) 2300 (5,070 lbs) 3300 (7,275 lbs)
Shipping weight kg 1250 (2,760 lbs) 1400 (3,090 lbs) 2500 (5,510 lbs) 3800 (8,375 lbs)
Shipping dimensions mm 1680x826x2160 (66x33x85”) 1806x826x2190 (71x33x86”) 2060x995x2240 (81x39x88”) 2670x1120x2410 (105x44x95”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Specifications RD 70 M RD 70 L RD 100
2.75” capacity, medium 2.75” capacity, large 3.9” capacity
Capacity Drilling Steel mm Ø 65 (2.5”) Ø 80 (3.1”)
Cast iron mm Ø 70 (2.75”) Ø 100 (3.9”)
Tapping Steel mm Ø 50 (2”) Ø 65 (2.6”)
Cast iron mm Ø 60 (2.4”) Ø 75 (3”)
Column diameter mm 432 (17”) 550 (21.7”)
Max spindle-column distance mm 1580 (62.2”) 2000 (78.75”) 2500 (98.4”)
Min spindle-column distance mm 440 (17.3”) 490 (19.3”) 500 (19.7”)
Spindle head travel mm 1140 (44.9”) 1510 (59.4”) 2000 (78.7”)
Max base-spindle end distance mm 1600 (63”) 1900 (74.8”) 2000 (78.7”)
Min base-spindle end distance mm 380 (15”) 500 (19.7”) 550 (21.7”)
Elevating height of arm mm 850 (33.5”) 1100 (43.3”) 1000 (39.3”)
Box table dimensions mm 700x500x400 (28x20x16”) 1000x800x500 (39×32×20”) 1000x800x560 (39x31x22”)
Dimensions of base mm 2480x1050x210 (98x41x8”) 2908x1102x250 (115×43×10”) 3520x1400x320 (139x55x13”)
Spindle taper MT#5 MT#6
Stroke of spindle mm 370 (14.6”) 450 (18”)
Speeds rpm 40–1920 35–1890 16–1250
Feed of spindle rev 0.07–0.96 0.04–3.2
Main drive motor kW 5.6 (7.5 Hp) 9 (12 Hp)
Elevating motor kW 1.5 (2 Hp) 2 (3 Hp) 3.7 (5 Hp)
Clamping motor kW 0.7 (1 Hp) 0.7 (1 Hp)
Coolant equipment kW 0.09 (.125 Hp) 0.19 (.25 Hp)
Overall height mm 3170 (125”) 3470 (137”) 3990 (157”)
Base + column height mm 2660 (105”) 2960 (117”) 3850 (152”)
Weight kg 4600 (10,140 lbs) 5600 (12,345 lbs) 13000 (28,660 lbs)
Shipping weight kg 5100 (11,240 lbs) 6600 (14,550 lbs) 13500 (29,760 lbs)
Shipping dimensions mm 2850x1400x2940 (112x55x116”) 3105x1400x3300 (122x55x130”) 4000x1600x3850 (157x63x152”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Get a quote

A friendly sales rep will contact you within one business day to answer your questions and provide more info.

Or call now: +1 224-216-8886

  • This field is for validation purposes and should be left unchanged.
  • Download PDF FileRD 50 • 60 • 70 • 100
← Previous

Related Products

RDS 40 A
RDS 40 A
Universal radial drilling machine with swiveling arm and two work zones.