Ring and profile bending machine

PBH 100 • 120

Machine for circular bending of metal profiles

PBH Series Profile Bender

These machines are specifically designed for circular bending of metal profiles, can be operated either vertically or horizontally and all three rolls are hydraulically driven. The standard set of bending rolls are suitable for bending square, flat, angle and shaped profiles. The PBH angle roll can also be fitted with custom rolls for bending tubes and other round profiles.

Semi-automatic control NC EasyView

All movements, processes and commands of the operator during the bending process can be recorded in the teach-in mode and then recalled and played back automatically at any time
To achieve the required bending results, all stored data can be edited
Memory for 48 bending programs with 1000 steps each
Digital display for the side roller positions
Horizontal or vertical machine orientation
Hydraulic adjustable bottom rolls
3 rollers are driven by hydraulic motors and planetary gears
Hardened shafts

Standard configuration

Standard bending rolls
Sturdy welded steel construction
Mobile control panel
2 bending speeds
Tool kit
Digital display (2 axes)
Hydraulic guide rollers adjustable in 3 axes (PBH 120)
Mechanical adjustment (PBH 100)
Operation manual

Optional configuration

Special dies
Infinitely adjustable bending speed
Oil/air cooling
NC EasyView control

Get a quote or call (224) 216-8886

Specifications		PBH 100	PBH 120
Specifications		3.9” shaft Ø	4.75” shaft Ø
Shaft diameter	mm	Ø100 (3.9”)	Ø120 (4.75”)
Roll diameter	mm	Ø315 (12.5”)	Ø390 (15.4”)
Main drive motor	kW	7.5 (10 Hp)	15 (20 Hp)
Bending speed	m/min	7 (275”/min)	2–7.5 (78–295”/min)
Dimensions (L/W/H)	mm	1465x2000x1700 (58x79x67”)	2000x1650x1900 (79x65x75”)
Weight	kg	3650 (8,000 lbs)	4770 (10,400 lbs)
Item No.		9312005	9312006

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.

Model			PBH 100		PBH 120		Scope of supply
No	Profile type	Unit	Dimensions	Min. bending diameter	Dimensions	Min. bending diameter	Scope of supply
1		mm	60 (2.4”) 15 (0.6”)	Ø750 (30”) Ø400 (16”)	65 (2.5”) 20 (0.75”)	Ø750 (30”) Ø500 (20”)	+
2		mm	100×20 (4×0.75”) 30×10 (1.2×0.4”)	Ø1000 (40”) Ø400 (16”)	125×20 (5×0.75”) 30×10 (1.2×0.4”)	Ø1200 (48”) Ø500 (20”)	+
3		mm	160×35 (6.3×1.3”) 80×5 (3.1×0.2”)	Ø800 (32”) Ø400 (16”)	180×40 (7×1.5”) 100×10 (4×0.4”)	Ø1000 (40”) Ø500 (20”)	+
4		mm	UPN 160 (6.3”) UPN 30 (1.2”)	Ø800 (32”) Ø400 (16”)	UPN 180 (7”) UPN 40 (1.5”)	Ø800 (32”) Ø500 (20”)	+
5		mm	UPN 160 (6.3”) UPN 30 (1.2”)	Ø800 (32”) Ø400 (16”)	UPN 180 (7”) UPN 40 (1.5”)	Ø800 (32”) Ø500 (20”)	+
6		mm	100×11 (4×0.4”) 30×4 (1.2×0.15”)	Ø1000 (40”) Ø400 (16”)	100×11 (4×0.4”) 30×4 (1.2×0.15”)	Ø800 (32”) Ø500 (20”)	+
7		mm	100×11 (4×0.4”) 30×4 (1.2×0.15”)	Ø1000 (40”) Ø400 (16”)	100×11 (4×0.4”) 30×4 (1.2×0.15”)	Ø800 (32”) Ø500 (20”)	+
8		mm	90×10 (3.5×0.4”) 30×4 (1.2×0.15”)	Ø1000 (40”) Ø400 (16”)	100×11 (4×0.4”) 30×4 (1.2×0.15”)	Ø1000 (40”) Ø500 (20”)	+
9		mm	80×5 (3.1×0.2”) 25×2 (1×0.08”)	Ø1500 (60”) Ø450 (18”)	90×15 (3.5×0.6”) 30×3 (1.2×0.12”)	Ø1800 (71”) Ø500 (20”)
10		mm	100x40x4 (4×1.5×0.15”) 25x15x2 (1×0.6×0.08”)	Ø1300 (52”) Ø450 (18”)	120x40x4 (4.75×1.5×0.15”) 30x20x3 (1.2×0.75×0.12”)	Ø1800 (71”) Ø500 (20”)
11		mm	Ø75 (3”) Ø15 (0.6”)	Ø800 (32”) Ø450 (18”)	Ø80 (3.1”) Ø20 (0.75”)	Ø850 (34”) Ø500 (20”)
12		mm	Ø125×2.5 (5×0.1”) Ø15×1 (0.6×0.04”)	Ø1400 (56”) Ø450 (18”)	Ø140×3 (5.5×0.12”) Ø20×1 (0.75×0.04”)	Ø1500 (60”) Ø500 (20”)
13		mm	Ø4×0.25” Ø0.5×0.1”	Ø1000 (40”) Ø450 (18”)	Ø5×0.25” Ø0.75×0.1”	Ø1500 (60”) Ø500 (20”)
14		mm	100x100x12 (4x4x0.5”) 40x40x4 (1.5×1.5×0.15”)	Ø1000 (40”) Ø700 (28”)	120x120x12 (4.7×4.7×0.5”) 40x40x4 (1.5×1.5×0.15”)	Ø1200 (48”) Ø600 (24”)
15		mm	100x100x12 (4x4x0.5”) 40x40x4 (1.5×1.5×0.15”)	Ø1000 (40”) Ø550 (22”)	100x100x10 (4x4x0.4”) 40x40x4 (1.5×1.5×0.15”)	Ø1500 (60”) Ø600 (24”)
16		mm	IPN 180 (7”) IPN 80 (3.1”)	Ø1000 (40”) Ø400 (16”)	IPN 200 (8”) IPN 80 (3.1”)	Ø1200 (48”) Ø500 (20”)
17		mm	HEB 100 (4”) HEA 100 (4”)	Ø1200 (48”) Ø2000 (78”)	HEB 120 (4.75”) HEA 140 (5.5”)	Ø1200 (48”) Ø1200 (48”)

*The above specifications are subject to change without prior notice. No liability for printing mistakes. Machine may be shown with optional equipment.
Material: St. 37. + = Standard bending rolls. = Special-design bending rolls.